After the configuration is complete, start the backup and restore operation to the Data Domain system.
The way I confirmed this was by doing a trace route from one of the host blades to each GigE interface on DD2500, the results was only one hop which was the connection to the Gateway which means the traffic never exit the Cisco FI. Run the following command to register the Data Domain system to the host: ddbmadmin -P -zYou will need to provide an IP address on VLAN 100 for the 10GigE ports within the DD2500.Īs per default the system is design to use the shortest path first, once it learned it Port MAC Address and also the Host and DD2500 are connected to the same FI6248Cluster the traffic will happen internally and won’t use customer network. My host Production VLAN sits on VLAN 100.Ĥ. On my case I put all the same VLANs as the one defined on the LAN Could. Under the LAN tab you will need to define within the Appliance Cloud the VLAN you will use.
Define whatever ports you are using in the FI6248 as application port.ģ. I was able to connect and configure the DD2500 using the ports of the FI6248 Cluster.Ģ. Useful Information if someone is looking to try this. EMC Data Domain deduplication storage systems continue to revolutionize disk backup, archiving, and disaster recovery with high-speed, inline deduplication.
0 kommentar(er)
